Questions?

Call now on 01223 263222 or 07736 346790. Or click here to email us

24hr Call Out

Emergency call outs within one hour, day or night, 24/7! (25 mile radius of Cambridge)

Brochure

Download PDF Brochure (140KB)

How to Install a Fire Alarm in your Home

Alarms Maintenance outline the basics of how to install a fire alarm in your home. If you would like to ensure that your fire alarm is professionally fitted and if you live in the region of Cambridge. Then we are more than happy to help you!

Become your own Fire Alarm Installer

1, select your location. it's strongly advised via the fire department that you just mount smoke detectors high on the wall, or on the ceiling faraway from windows and exterior doors. (This isn't the case for CO alarms, regarding that, see #2, below.) Smoke fills up an area from the ceiling down, therefore having the detectors high ought to warn you ahead of time. it's conjointly advised that detectors be placed a minimum of ten cm / 4" from the wall once put in on the ceiling, and ten cm / 4" from the ceiling for wall installation.

2,The diffusion of CO in air is comparatively even, which means that a supply of CO will distribute the gas equally throughout the space and house. once putting in a CO alarm, select a location wherever the alarm can keep clean, and out of the means of youngsters or pets.

3, Place smoke detectors within the best places round the house. it's necessary to put in detectors close to sleeping areas and on each level of your home. Subsequentky you should place a detector in hallways and a CO detector close to heating, like gas furnaces. Avoid putting in a smoke detector within the room. Unless, of course, you would like everybody to note your lack of cookery skills! Keep detectors one meter / three feet from the doorways of steam transmitting areas, such as the bathroom.

4,Install the Hardware.

Measure the gap between the mounting holes on the rear of the mounting bracket. Mark constant distance on your chosen location.

Drill little holes at the marks.

With the screws secure the mounting bracket to the surface.

Mount the remainder of the detector into the bracket.

5, Perform regular maintenance.

Routinely check your detectors. Push the check button to test. If there's no noise, or a faint noise, you must check or replace the batteries. For smoke detectors, you'll need to check the detector victimization simulated smoke.

6 Attempt to replace the batteries a minimum of twice a year. Tip: whenever you alter the clocks, repalce the batteries. Check the unit once batteries have been replaced. Then verify that the batteries are properly put in and working fine..

7, Note that CO detectors have a chemical that helps within the detection method. This must be replenished over time, therefore make certain to see this similarly because the batteries.

8, It's fairly straightforward however it's a very important step to in defending your family and your home. For additional certainty take a moment to develop a security escape route. Ensure that every member of the family understand this escape route.